Our Axis Products
Click here to use our search function.

	Axis Citation Air Booster
	Fits the Axis and Citation turbines. With this booster in place, the PSI to the spraygun can be adjusted to a much higher pressure. It is suggested a pressure of between 6 and 8 PSI be used to atomize those higher viscosity materials, however 10 PSI can easily be reached. Pressures in excess of this, although available, defeat the HVLP concept thereby increasing overspray and use more material than necessary. The question most frequently asked is: why use a turbine at all? The answer is because of the turbines ability to eliminate moisture and oil from the air line. The warm air produced by the turbine along with the coalescent filter that is used in the booster unit will eliminate 99.99% of 0.1 micron oil, water and dirt from the air before it reaches the gun.
	Price	$275.00
	Quantity desired

*Indicates this item ships hazardous.
Please see our shipping page for an explanation of shipping charges.
Choose paint colors from our Paint Color page, or request an actual color chart by email.
Prices are subject to change without notice.
�2004 Aircraft Technical Support, Inc.� All rights reserved.

	Citation 240 Sprayer / Respirator System
	Deadly isocyanates, VOCs and other toxins present in today's paint demand you use a Fresh Air Respirator. No other system offers "built in" respirator protection with state of the art HVLP paint sprayer in the same cabinet. Components designed to last a lifetime of rigorous use. Easy to use. Just plug in, turn on the switch and go. Three stage system. This unit includes a mask, a 40' respirator hose, a 40' sprayer hose, the LexAire bottom feed spray gun with a 1.2mm needle nozzle set, and 4' whip hose.
	Size
	Quantity desired

	Axis SP 2003 Paint Spray System
	Most popular and best value. 3 stage turbine. 40' hose (upgrade). Lex-Aire bottom feed spray gun with 1.2mm needle nozzle set. 1' stub hose. 4' whip hose. Two stage filtration system. 107 CFM 5.5 PSI. 120 volts 13.0 amps. Full two year warranty. First choice of the professional. Excellent for fine finishes. Spray any coating from stains to lacquer, polyurethane and enamels. Recommended for automotive type finishes.
	Price	$759.00
	Quantity desired

	HobbyAir 1 Respirator System
	Designed to give safe and affordable protection to the non-professional painter. This very affordable line of respirators should be considered in applications where NIOSH approval is not required. SAFE - Allows only fresh air to your lungs. COMFORTABLE - Lightweight face mask with beltline hookup. EASY TO USE - Simple Snap-together fittings. AFFORDABLE - No other system offers so much protection at such a low price. LIGHTWEIGHT AND PORTABLE - The Blower Unit weighs only twelve pounds. Includes standard output blower unit, 40' respirator hose, and half face mask. Recommended accessories: full face mask when isocyanates are present.
	Mask Choice
	Quantity desired

	Half Facemask Assembly
	For use with HobbyAir and Citation.
	Price	$84.00
	Quantity desired

	Full Facemask Assembly
	Made of durable neoprene or silicone rubber with large, distortion free acrylic lens and 5 point headband attachment for air tight fit. Purchased separately.
	Price	$195.00
	Quantity desired

Full Facemask Eyeglass Option
Must have your lenses made for frame kit. For use with HobbyAir and Citation.
Price	$75.00
Quantity desired

Full Mask Lens Replacement
For use with HobbyAir and Citation.
Price	$35.00
Quantity desired

Full Mask Lens Protectors
Package of 25. For use with HobbyAir and Citation.
Price	$23.00
Quantity desired

	Tyvek Painting Hood
	Worn over half mask. For use with HobbyAir and Citation. Designed to be worn over half facemask to protect the skin, hair and eyes from overspray. Large viewing lens. Generous 16" x 6" lens. Not air supplied.
	Price	$35.00
	Quantity desired

	Tyvek Painting Hood
	Air supplied. For use with HobbyAir and Citation.
	Price	$94.00
	Quantity desired

Tyvek Hood Lens Protectors
Peel off lens protectors in package of 25 to protect the large plastic lens. For use with HobbyAir and Citation.
Price	$23.00
Quantity desired

HobbyAir Buddy System
Includes high output blower unit with "Y" valve, 10' leader hose, 2-40' hoses, 2 belt assemblies, 2 quick disconnects, and choice of facemasks.
Mask Choice
Quantity desired

	LexAire TA Spray Gun
	Offers a pressurized pot. Uses only 303 stainless steel for internal parts. Packing is made of machined Teflon. Internal tolerance levels equal .0005". Caps are made of chrome coated brass - not aluminum. All needle/nozzles are interchangeable (centerless grinding). Quality consistence from one gun to the next.
	Feed Choice
	Quantity desired

Remote Air Intake Kit
Adaptor which comes installed on your system with 50' of 4" hose to access fresh air from a remote location. For use with HobbyAir or Citation.
Price	$75.00
Quantity desired

	Citation Thru-Wall Fittings
	The Thru-Wall kit will contain a pipe (provided according to your bulkhead thickness specifications) washers, nuts and a male & female side. A short hose is also included to connect the air pump to the outside wall. Note: This installation will require two people - one on either side of the wall, door etc. We will email you and request the thickness of your bulkhead before shipping.
	Price	$52.00
	Quantity desired

2.5 Gallon Remote
Comes with two 15' hoses. Requires 10psi compressor.
Price	$250.00
Quantity desired

Whip Hose
4' length.
Price	$20.00
Quantity desired

Air Tight Lid for 1 Quart Cup

Price	$25.00
Quantity desired

8 oz. Detail Cup

Price	$29.00
Quantity desired

Thru-Wall Assembly
For use with HobbyAir or Citation. We will email you and request the thickness of your bulkhead before shipping.
Price	$26.00
Quantity desired

2 Quart Remote
With two 5' hoses.
Price	$198.00
Quantity desired

Axis Filter Replacement
For use with Citation and Axis paint spray gun.
Price	$4.25
Quantity desired

Axis / Citation Needle Nozzle Set
Select the proper fluid nozzle for the material to be sprayed from this linked chart.
Price	$88.00
Set Size
Quantity desired

	Hepa Filter Replacements
	Replace dirty filters with 'Pop-In' cartridges. For use with HobbyAir or Citation.
	Size
	Quantity desired

	Aircraft Fabric Covering Video
	This 1-3/4 hour video is produced by Alexander Promotions in cooperation with EAA SportAir Workshops. This comprehensive video presents every aspect of the Poly-Fiber fabric covering process in detail, with easy-to-understand instruction. You'll see: Preparing the surfaces for covering, attaching the fabric to the airframe, tightening the fabric with an ordinary iron, applying the first coat of Poly-Brush, tying the special rib-lacing knots, applying the finishing tapes, spraying the UV-blockeer Poly-Spray, and applying the final color coats.
	Price	$39.95
	Choose Format
	Quantity desired

	Shoot Suit
	Available in white only. Nylon front, sleeve, hood. Breathable cotton/poly back. Full body coverage. Full zipper front. Back tape pocket sewn into side seam so it won't pull out. Half the cost of disposables. Reusable. Washable. Machine wash & dry. Lint free nylon front, sleeve, hood. Glazed finish on back breather panel resists lint.
	Size / Hood Choice
	Quantity desired

Shoot Boot
A nylon shoe cover, helps control dust and foreign particles from entering paint booth on shoes. Keeps overspray off shoes. ShootBoots are machine washable or may be rinsed out prior to use. Rinsing just before entering booth so boots are damp can also be helpful for dust control.
Price	$10.32
Size
Quantity desired